Anticancer activity and evaluation of apoptotic genes expression of 2-azetidinones containing anthraquinone moiety

Molecular Diversity - Nowadays, one of the principal causes of death in the world is cancer. A series of 2-azetidinones containing anthraquinone moiety with various substituents were synthesized...     

Frequencies Rotation at High Sound Pressure Levels Toward Low Frequencies

Today, analyzing of sound pressure level and frequency is considered as an important index in human society. Sound experts believe that analyzing of these parameters can help us to better understanding of work environments. Sound measurements and frequency analysis did to fix the harmful frequency in all sections in Shiraz gas power plant with sound analyzer model BSWA 308. The sound pressure levels (L_P) and the one and one-third octave band were continuously measured in A and C weighting networks and slow mode for time response. Excel 2013 and Minitab 18.1 software used for statistical calculations. Results analyzed by Minitab 18.1 software. The highest harmful frequency in Shiraz Gas Power Plant (SGPP) was 50 Hz with 115 dB. The sound pressure level (SPL) ranged from 45 dB to 120 dB in one-third octave band and weighting network C. The maximum sound pressure level was in Craft electricity generator with 105.3 dB and 67 Hz. Sound pressure level in surrounded environment was 120 dB. According to the results, in this industry the sound pressure level exceeded the Occupational Exposure Level of Iran (OEL). The value of sound pressure level were higher than the Standard of occupational health. SGPP consumes 47000 cubic meters of natural gas per hour to produce 100 MW (Mega Watt) of electricity. It is very high and it is not economical and cost effective. These numbers indicate that the power plant’s efficiency is low. It could be concluded that the noise pollution is an important issue in these industries. Moreover, SGPP produce noise with loss energy. Frequencies rotation at high sound pressure levels toward low frequencies were happened.     

Synthesis of Novel Triazole Incorporated Thiazolone Motifs Having Promising Antityrosinase Activity through Green Nanocatalyst CuI-Fe3O4@SiO2 (TMS-EDTA)

In the present work, novel 5-((1-benzyl-1,2,3-triazol-4-yl)methoxybenzylidene)-2-(arylamino)thiazol-4-one thiazolone incorporated triazole derivatives have been designed as tyrosinase inhibitors. The compounds were synthesized through click reaction in good yield. Moreover, the antityrosinas activity of the synthesized derivatives was evaluated. In the search for establishing a click copper-catalyzed azide/alkyne cycloaddition (CuAAC) reaction under strict conditions, in terms of a novel air-stable, a recyclable and efficient magnetic catalyst was planned for new triazole derivatives as a well-organized copper iodide supported on the functionalized Fe₃O₄@SiO₂ core-shell (CuI/Fe₃O₄@SiO₂(TMS-EDTA) nanoparticles). The engineered nanocatalyst synthesized for the first time and characterized by different methods, including FT-IR spectroscopy, XRD, FESEM, EDX, TEM, TGA, and BET analysis. The excellent catalytic performance in ethanol with high surface area (351.7 m²g⁻¹) and short reaction time for diverse functional groups (120–200 min), no use of toxic solvents, reusability of the catalyst, and using eco-friendly conditions are the advantageous of this work. Moreover,the nanocatalyst can be used at least five times without any significant decrease in the yield of the reaction. The thiazolidine-triazole derivatives 9a , 9c , 9e , and 9 g showed promising tyrosinase inhibitory activity with IC₅₀ values in the range of 5.90–9.81 μM. The compounds were found to be considerably more potent tyrosinase inhibitors than the reference inhibitor kojic acid (IC₅₀ = 18.36 μM).     

A Modified Peng–Robinson Equation of State for Heavy Hydrocarbons

Russian Journal of Physical Chemistry A - A new simple and accurate functional form for an attractive parameter α is introduced for Peng–Robinson equation of state. The modified...     

Aeroelastic analysis of swept pre-twisted wings

In this paper, aeroelastic modeling of aircraft wings with variations in sweep angle, taper ratio, and variable pre-twist angle along the span is considered. The wing structure is modeled as a classical beam with torsion and bending flexibility. The governing equations are derived based on Hamilton’s principle. Moreover, Peters’ finite state aerodynamic model which is modified to take into account the effects of the wing finite-span, the wing sweep angle, and the wing pre-twist angle, is used to simulate the aerodynamic loads on the wing. The coupled partially differential equations are discretized to a set of ordinary differential equations using Galerkin’s approach. By solving these equations the aeroelastic instability conditions are derived. The results are compared with some experimental and analytical results of previous published papers and good agreement is attained. Effects of the wing sweep angle, taper ratio, bending to torsional rigidity, and pre-twist angle on the flutter boundary in several cases are studied. Results show that these geometrical and physical parameters have considerable effects on the wing flutter boundary.     

Chemical composition and antibacterial activity of methanolic extract and essential oil of Iranian Teucrium polium against some of phytobacteria

The antibacterial activity of essential oil and methanolic extract of Teucrium polium was determined against Pseudomonas aeruginosa, Pantoea agglomerans, Brenneria nigrifluens, Rhizobium radiobacter, Rhizobium vitis, Streptomyces scabies, Ralstonia solanacearum, Xanthomonas campestris and Pectobacterium cartovorum by disc diffusion method. Minimum inhibitory concentration and minimum bactericidal concentration were determined by using the serial dilution method. Chemical composition of essential oil and methanolic extract was determined by GC-MS and HPLC. α-Pinene (25.769%) and myrcene (12.507) were of the highest percentage in T. polium essential oil, and sinapic acid (15.553 mg/g) and eugenol (6.805 mg/g) were the major compounds in the methanolic extract. Our results indicate that both methanolic extract and essential oil did not show antibacterial activity against P. aeruginosa. Also the essential oil did not show antibacterial activity against P. cartovorum. In general, both methanolic extract and essential oil showed the same antibacterial activity against R. solanacearum, P. agglomerans, B. nigrifluens and S. scabies.     

Preparation of conductive,flexible and transparent films by in situ deposition of polypyrrole nanoparticles on polyethylene terephthalate

In this study polypyrrole (PPy) nanoparticles were deposited as a thin film on the modified surface of polyethyleneterephthalate (PET) by in situ chemical polymerization in the presence of sodium dodecylsulfate (SDS), sodium dodecylbenzenesulfonate (DBSNa) and mixture of them as the surfactant. The surface of PET was modified by KOH before deposition and was investigated for conductivity and adhesion of PPy nanoparticles to PET. Resulting conductive flexible films were characterized by UV–Vis spectroscopy, fieldemission scanning electron microscopy, contact angle measurements and four-point-probe technique for conductivity. Direct morphological observation (FESEM) and electrical measurements indicated that the morphology, conductivity and the nature of deposited PPy films depend on surfactant, surface modification of PET and monomer concentration. In optimized process condition, uniform conductive films of PPy were obtained with good adhesion to PET.     

Polyelectrolyte Nanocomposite Membranes Using Imidazole-Functionalized Nanosilica for Fuel Cell Applications

The preparation and characterization of a new type of nanocomposite polyelectrolyte membrane, based on DuPont Nafion/imidazole-modified nanosilica (Im-Si), for direct methanol fuel cell applications is described. Related to the interactions between the protonated imidazole groups, grafted on the surface of nanosilica, and negatively charged sulfonic acid groups of Nafion, new electrostatic interactions can be formed in the interface of Nafion and Im-Si which result in both lower methanol permeability and also higher proton conductivity. Physical characteristics of these manufactured nanocomposite membranes were investigated by scanning electron microscopy, thermogravimetry analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, water uptake, methanol permeability, and ion-exchange capacity, as well as proton conductivity. The Nafion/Im-Si membranes showed higher proton conductivity, lower methanol permeability and, as a consequence, higher selectivity parameter in comparison to the neat Nafion or Nafion/silica membranes. The obtained results indicated that the Nafion/Im-Si membranes could be utilized as promising polyelectrolyte membranes for direct methanol fuel cell applications.     

The effects of pressure and hydrogenic donor impurity on the linear and nonlinear optical properties of a GaAs/GaAlAs nanowire superlattice

The combined effects of hydrostatic pressure, presence and absence of hydrogenic donor impurity are investigated on the linear and nonlinear optical absorption coefficients and refractive index changes of a GaAs/Ga_1−xAl_xAs nanowire superlattice. The wave functions and corresponding eigenvalues are calculated using finite difference method in the framework of effective mass approximation. Analytical expressions for the linear and third order nonlinear optical absorption coefficients and refractive index changes are obtained by means of compact-density matrix formalism. The linear and third order nonlinear absorption coefficient and refractive index changes are presented as a function of photon energy for different values of hydrostatic pressure, incident photon intensity and relaxation time in the presence and absence of hydrogenic donor impurity. It is found that the linear and third order nonlinear absorption coefficients, refractive index changes and resonance energy are quite sensitive to the presence of impurity and applied hydrostatic pressure. Moreover, the saturation in optical spectrum and relaxation time can be adjusted by increasing pressure in presence of impurity whereas the effect of hydrostatic pressure is negligible in the case of absence of hydrogenic impurity.